Ramuc EP Epoxy Pool Paint Kit
Ramuc EP Epoxy Pool Paint Kit
Ramuc EP Epoxy Pool Paint Kit
Ramuc EP Epoxy Pool Paint Kit
Ramuc EP Epoxy Pool Paint Kit
Ramuc EP Epoxy Pool Paint Kit
Ramuc EP Epoxy Pool Paint Kit
Ramuc EP Epoxy Pool Paint Kit
Ramuc EP Epoxy Pool Paint Kit
Ramuc EP Epoxy Pool Paint Kit
Ramuc EP Epoxy Pool Paint Kit
Ramuc EP Epoxy Pool Paint Kit
-20%
Read Guide

Ramuc EP Epoxy Pool Paint Kit

$214.65
$268.32
Color: Dawn Blue
Compare Color
Click On Color / Pattern To Compare, Click And Drag Images To Reorder
Ask a Question

Usually ships within 1-2 business days.

Resources

Price Match Guarantee. Read more.

Non-returnable due to hazardous materials transport restrictions.

Ramuc EP Epoxy Pool Paint Kit
Ramuc EP Epoxy Pool Paint Kit
$214.65
$268.32

Ramuc EP Epoxy Pool Paint delivers long-lasting protection with a high-gloss finish for concrete, plaster, and fiberglass pool surfaces. Designed for demanding environments, it resists stains, chemicals, and abrasion - making it ideal for pools, spas, slides, fountains, and koi ponds. With over 50 years of proven performance, this two-component epoxy system is self-priming and VOC compliant in all U.S. states and Canada.

Why Choose Ramuc EP Epoxy Pool Paint?

  • Hard, Durable Finish: Resists abrasion, chemicals, and staining for long-term surface protection.
  • High Gloss Appearance: Tile-like finish enhances the pool’s visual appeal and makes cleaning easier.
  • Proven Longevity: Provides up to 5 years of service life with proper preparation and application.
  • Versatile Surface Compatibility: Adheres to bare concrete, plaster, fiberglass, and previously painted epoxy surfaces.
  • Ideal for Indoor Use: Chemically cured epoxy is the top choice for indoor pools and water features.
  • VOC Compliant: Meets environmental standards throughout the U.S. and Canada.

Quantity Calculator

Use the table below to type in the dimensions of your project area, then click the Calculate button to determine the amount of Ramuc product needed for the job.

Length (ft):

Width (ft):

Depth (ft):

Total (sq ft):

Total rounded to nearest whole number.
Total assumes a bottom and four walls.
Epoxy Projects
Product Bare/Sandblasted/Rough Surface Fiberglass/Recoat
EP Epoxy
Hi Build Epoxy
HB31
Rubber Projects
Product Bare Surface Recoat
A-2
Acrylic Projects
Product Prepped Surface/Recoat
DS
ADC*
Total amount rounded up to nearest whole number.
Amounts shown are for 1 coat.
*ADC product amount should be calculated by L x W only.

Surface Preparation & Application

  • Assess Surface Integrity: Ensure plaster or concrete is sound; perform repairs and allow curing before painting.
  • Abrade Surface: Sand previously painted epoxy or bare fiberglass to #80 grit for proper adhesion.
  • Clean Thoroughly: Use Ramuc Clean and Prep Solution to remove oils, debris, and chalking. Rinse thoroughly.
  • Perform Condensation Test: Use 2'x2' plastic sheets to ensure surface dryness before painting.
  • Mix Components Properly: Mechanically mix Part A and B separately for 5 minutes each, then together for 15 minutes. Allow 20–45 min induction time before use.
  • Apply Two Coats: Use 3/8” mohair or lambskin roller. Apply within pot life window; sand between coats if >72 hours.
  • Temperature Control: Apply only when surface and air temps are between 50–90°F. Avoid application before rain or in high humidity.

Not Recommended For

  • Use on surfaces with unresolved structural or moisture issues
  • Application over unknown or incompatible coatings without testing
  • Use on vinyl, bare fiberglass without sanding, or with silicone-based fillers
  • Full-pool coverage with dark colors - use for accent only (fading risk)

  • Recommended Use: New or recoated concrete, plaster, fiberglass, or epoxy-painted pools
  • Colors: Dawn Blue, Dark Blue, Aquagreen, White, Black, Royal Blue, Beach Beige, Monument Grey
  • Finish: High Gloss
  • Coverage: 175–200 sq. ft./gal (bare surfaces); 400–450 sq. ft./gal (recoats or fiberglass)
  • Application Temp: 50°F – 85°F (10°C – 29°C)
  • Recoat Time: 16–72 hours (sand if more than 72 hours)
  • Cure Time: 5–7 days (outdoor); 10–14 days (indoor)
  • Dry Time to Touch: 6–8 hours
  • Solids by Volume: 60% ± 3%
  • Dry Film Thickness: 1.7–2.0 mils dry per coat
  • VOC: Max 340 g/L
  • Components: 2 (Part A & Part B)
  • Pot Life: 8 hours (@ 70°F, 50% RH)

Product Manuals
Product Data Sheet English | Spanish | French EP Epoxy Application Guide EP Epoxy Recoating Steps
Shipping Information

We aim to get your pond and water garden supplies to you as quickly as possible.

  • Orders over $199 CAD ship free across Canada (excluding oversized items).
  • A flat rate of $14.99 applies to all smaller orders.
  • Standard delivery takes 1 to 4 business days.
  • Most in-stock items are dispatched within 24 hours.
  • Special order items may require 2 to 14 business days before shipping, depending on availability.
Returns & Exchanges

If something isn’t quite right, we’ve got you covered.

  • Returns are accepted within 30 days of delivery.
  • Items must be unused, in original packaging, and include all parts and proof of purchase.
  • Items marked as Clearance are final sale and cannot be returned or exchanged.

For full details, please review our Shipping Policy and Refund Policy.

Customer Reviews

People Also Bought

Here’s some of our most similar products people are buying. Click to discover trending style.