Ramuc DS Acrylic Swimming Pool Paint

Ramuc DS Acrylic Pool Paint is a water-based coating designed for pools that require a quick return to service. It adheres to damp, properly prepared surfaces and is ideal for repainting previously painted chlorinated or synthetic rubber coatings. The finish dries quickly and offers excellent UV resistance and color retention. Pools can be refilled just 3 days after application, making it a smart choice when downtime must be minimized.

Why Choose Ramuc DS Acrylic Pool Paint?

• For Quick Turnaround: Pools can be filled just 3 days after final coat—ideal when minimizing downtime is critical.
• Applies to Damp Surfaces: Can be applied even when the surface hasn’t fully dried, speeding up the process.
• Recoat Existing Finishes: Bonds well to previously painted chlorinated or synthetic rubber surfaces.
• UV and Color Resistant: Maintains appearance over time thanks to high color fastness and UV protection.
• Water-Based and VOC Compliant: Low odor and safe for use in all U.S. states and Canada.

Technical Specifications

• Recommended Use: Recoating chlorinated or synthetic rubber surfaces
• Colors: Dawn Blue, White, Black, Royal Blue
• Finish: Matte
• Coverage: 350–400 sq. ft./gal (on recoats)
• Application Temp: 50°F – 90°F (10°C – 32°C)
• Recoat Time: 4 hours
• Full Cure: Outdoor pools: 3 days before filling; Indoor: 7–10 days
• VOC: <250 g/L
• Solids by Volume: 35% ± 2%
• Dry Film Thickness: 1.2 mils dry (3.4 mils wet)
• Components: 1

Surface Preparation & Application

• Clean and repair: Use Ramuc Clean & Prep Solution to remove contaminants and improve surface porosity. Repair cracks with hydraulic cement or polyurethane sealant.
• Ensure surface soundness: Not a solution for crumbling or weak plaster—repair first and allow to cure fully.
• Mix and apply: Use a 3/8” mohair or lambskin roller (no cardboard core) or airless sprayer. Mix thoroughly and intermix gallons for color consistency.
• Dry time between coats: Allow at least 4 hours before recoating. Avoid heavy application or back-to-back coats.
• Cure time before filling: Allow 3 dry days for outdoor pools; extend in cooler or humid conditions or after rainfall.
• Condensation test: Confirm dryness before painting using a clear plastic sheet taped to the surface.

Not Recommended For

• Use on fiberglass, hot tubs, or spas
• Use on bare concrete or bare plaster (use Ramuc Hi-Build Epoxy instead)
• Application over epoxy-painted surfaces (use EP Epoxy or Hi-Build Epoxy instead)
• Use of dark colors for full pool coverage—recommended for accents only